Create your own flooring.

SC 450 2-Piece Carbide Tipped 3-Wing - Includes nailhead relief to allow complete concealment of nail head when installing flooring. 3-1/4 Dia x 7/8″ CL, 1/4″ Tongue, 1/2″ & 3/4″ Bore for 5/8 to 3/4 material.

SC 451 Same as above, but 1″ & 1-1/4″ Bore for 5/8 to 3/4 material.

SC 453 2-Piece Carbide Tipped 3-Wing - The unique rounded edge created by these cutters makes flooring fast and easy to install, while the nail slot helps prevent splitting. For 5/8″-3/4″ Material, 2-5/8″ Dia, 7/8″ CL, 1/4″ Tongue, 3/4″ Bore

FLOORING TONGUE & GROOVE SHAPER CUTTERS

£140.00 ~~£302.00~~

Quantity

QUESTIONS & ANSWERS

Ask a Question

For the SC 4512 Two piece T & G shaper cutter does it come with shins for different size shaper spindles.

3/4 bore shaper cutters come with adapters to 1/2" and 1-1/4 bore shaper cutters come with 1" adapters.
Does SKU:SC453 come with a 1/2 inch bore adapter?

This does have reducers for 1/2".
Can I use the SC453 cutters on 1-1/4” thick wood?

No. We have WL-1588L but it's a straight Tongue and Groove.

https://www.woodline.com/products/fully-jointed-tongue-groove?variant=43987492176098

TandG Flooring cutter

Used with 3/4 white ash on a 1HP shaper and it handled it very well. Nice clean cuts.

Tongue and Groove Flooring shaper cutters are full featured

Great. Like the relief at bottom of the joint and the shortening of the tongue to avoid bottoming. Sharp cutters, nice fit of tongue to groove, no adjustments to spindle height switching from groover to tongue. One minor cavil:

because the bottom of the tongue cut is a different diameter from spindle center from the diameter of the groove cutter, it is necessary to change your fence setting (I used a back fence setup). Some technical numbers on the offset would have been useful instruction or perhaps the cutters could be sized to eliminate this procedure.